Updated: June 14, 2018
If your air conditioner was installed before 2010 and you don’t know what R22 is then you should probably read up. R22 refrigerant is a chemical that keeps the air coming from your air conditioning system cool, so it’s unquestionably incredibly critical. Most air conditioning units older than 10 years use an AC refrigerant called R22 that’s commonly known as Freon*, and is noted by the EPA as HCFC-22. In this guide, we’ll use the name R22. This refrigerant was introduced in the 1950s and became the main AC refrigerant in the residential heating and cooling industry.
The Montreal Protocol
Moving ahead a few decades the world realized that R22 refrigerant was aiding in the depletion of the Earth’s ozone layer. Not a great thing. So, the U.S. EPA, in cooperation with other agencies and groups around the world, initiated a phase out of lots of ozone-depleting agents as part of an international agreement known as the Montreal Protocol. The regulation lists many HCFCs and CFCs (different types of refrigerants that deplete the ozone layer), but R22 is considered one of the worst offenders.
Timeline and R22 phase out progress in 2018
In 2003, the phase out of R22 production and imports began. By the beginning of 2010 the production and import of R22 was reduced. However, servicing current, existing equipment is still permitted while there is an available supply of R22. To ensure the public’s compliance with the new law, all sales of R22 must be bought by a certified technician. R22 production and import will be continually reduced by law until 2020, when all production and import will be banned. Only recycled R22 refrigerant will be available to service existing air conditioners after 2020.
The graph above shows the EPA’s consumption allowance of R22 by percentage. The limits on R22 consumption were implemented in 2010 and follow a declining trend until 2020.
So how does this affect prices?
If you’re thinking that this sounds like a great case study for an economics professor teaching supply and demand, then you are right. As you might assume, older air conditioners could more frequently experience leaks and need repairs. Any systems that are older than 2010 are more likely to use R22, which means there’s a lot more demand for it, and a very limited supply. Prices have only risen due to scarcity.
Don’t forget that in order to buy R22, you’ll need to be an EPA-certified technician. So, the normal homeowner can’t purchase a cylinder themselves. Plus, there are some firm regulations now on how refrigerant is reclaimed and recycled, which adds to the cost. This fee is passed on to the homeowner as companies have to cover the increased overhead associated with R22 repairs. There are requirements for importing, labeling, record keeping, reporting, destruction and reclaiming of R22 from existing systems.
So, what does this mean for you?
The cost of R22 is radically increasing because of the dwindling supply, and new refrigerant will no longer be available for use at all after 2020, except from recycled quantities.
If you’re thinking, “Wow, this is starting to sound expensive,” you’re right, it is. This is why when our professionals come out to review your unit we look to see what refrigerant your unit uses, and in the majority of the cases, we’ll advocate for an upgrade as a result of the increasing cost of sustaining an R22 air conditioner.
How do I know if my unit uses R22?
If you have an air conditioning system that was built before 2010, your AC will probably have R22. However, if you installed your air conditioner after January 1, 2010, then your unit may not have R22. You can check the type of refrigerant your system runs on by checking the appliance’s nameplate. This nameplate is normally found on the outdoor condenser of your central air conditioning system. If you don’t find it, you can check your user’s manual. If that doesn’t work either, you can call your local Service Experts center. If you have a maintenance agreement with us, we also have your information on hand and a tech can let you know quickly if your unit uses R22.
Instead of Freon, use Puron
The industry has changed from R22 to R410a, which you may identify by the brand name Puron. In the remainder this article, we’ll use the name R410a (although Puron is a recognized brand, there are other companies that make R410a). There are some valuable benefits to switching from an R22 air conditioning unit to one that uses R410a. It offers a higher safety rating and an ozone depletion rating of zero, and it performed slightly better on energy-efficiency tests than R22.
You may have heard information about “drop-in” replacements for R22. We strongly advocate against this choice. Usually a homeowner who is anxious about the cost of replacing their air conditioner seeks out an alternative, and this sounds like an easy solution. It often costs the homeowner more money, and almost always voids the manufacturer warranty. The reality about “drop-ins” is that there is no “drop-in” solution where you merely swap out the refrigerant. The phrase “drop-in” is referring to retrofitting a system, which when done properly can cost the homeowner as much, or more, money than buying a new unit that uses R410a. In part, this is because different refrigerants function at different pressure levels and require different parts to run, which results in the technician needing to replace the most expensive components of your system to be compatible with the new refrigerant. If this vital step is avoided, your system will quickly stop working, and you’ll need to get a new unit anyway.
Your manufacturer will probably not pay for the parts to make this swap because retrofitting your AC system will likely void the warranty. It’s usually just a temporary fix, but shopping for a new upgraded AC system will probably benefit most homeowners in dependability, satisfaction, and long-term comfort.
It’s wise to discuss pricing offers with your HVAC provider if you’re worried about cost. At Service Experts Heating & Air Conditioning, we offer financing that makes a replacement achieveable, and we keep track of any manufacturer and utility rebates that would make it easier to manage a surprising replacement. To avoid emergencies on a hot day, lots of our customers decide to do a pre-emptive replacement, and replace an old system before it doesn’t work. If you’re considering that route as well, then you’re in good company!
If your unit was built after 2010, you’re probably safe
If your heating and air conditioning system was built after January 2010, the R22 phase out dilemma may not apply to you, because it’s possible that your system uses the new, approved replacement refrigerant, R410a. However, systems installed after 2010 could potentially use R22, so it’s best to check with an HVAC Expert. You can always find this and the refrigerant type by reviewing the nameplate on your condenser (the condenser is the outside unit).
What do I do if my air conditioner uses R22?
To recap, if your HVAC equipment was produced prior to January 2010, particularly if it’s older than a decade, you have some options:
- Purchase an upgraded, more environmentally-friendly system that uses R410a.
- Call an expert to replace the parts in your current air conditioner to help make it compatible with an approved air conditioner refrigerant. This is not recommended.
- Keep using recycled R22 and burn cash like it’s the ozone layer.
To be clear, the EPA regulates the production and use of this refrigerant, but not your system. You are not required by the law to replace your air conditioner. Ultimately, your AC will not work and it will need to be replaced, and only R410a units will be available to buy.
The ideal option is to get a new, upgraded air conditioner, specifically if your current air conditioner is already more than 10 years old. Service Experts Heating & Air Conditioning has several financing options that help make the purchase affordable, and again, we look out for rebates from HVAC manufacturers and local utilities to help you out. New AC equipment can be more efficient and present you superior comfort, helping to reduce your energy costs.
We do have one more option available in select locations. To provide our customers with high-quality equipment and service at competitive rates, we started the Advantage Program, which is a worry-free program that provides HVAC equipment with a full coverage repair and maintenance plan for a low monthly price.
You could also select the status quo and continue using recycled R22 air conditioning refrigerant for the near future. While this sounds like a good alternative, the price of servicing old R22 A/C systems is starting to go over several hundred dollars (easily a down payment on a new system). You may also see the prices grow as demand continues to rise on a substance that is no longer produced or widely accessable.
If you aren’t aware of what type of AC refrigerant your air conditioning system uses, we can help. Call Service Experts Heating & Air Conditioning today and we can provide an inspection to confirm if you are currently using R22 and, if so, what’s the best next step.
The good news
While making the move to an approved AC refrigerant may intimidating, it’s helping to save the ozone layer. These regulations will help guard the ozone layer in the Earth’s atmosphere, which helps block radiation from the sun and prevents serious illnesses, such as skin cancer. It’s not exaggerated to say that you, as a homeowner, are a grand part of this by replacing an old R22 unit with a newer, ozone friendly unit.
If you have any questions, please reach us for a free, in-home consultation by filling out the form below.
*Freon is a registered trademark of the DuPont Corporation